Sub-Micron Laboratory
Housing some of the most accurate metrology equipment available today, our newest addition to our facility features a laboratory built inside of a laboratory to further decrease our uncertainty and increase the quality of our calibrations.
High Accuracy Dimensional Calibrations:
Gage Blocks
Long Gage Blocks
Plug Gages
Ring Gages
Thread Plug Gages
Thread Ring Gages
Spline Rings
Spline Plugs
CMM Spheres
Optical Flats
Taper Masters
Dimensional Laboratory
With over 60 years combined experience in Metrology, we are equipped to service nearly every type of dimensional gage in the field. Our capabilities are far too expansive to list here, if you have any questions, feel free to reach out for further details.
Dimensional Calibrations:
Chamfer Checkers
Cylinder Squares
Dial Bore Gages
Feeler Gages
Granite Squares
Height Gages
Height Masters
Gage Pins
Gear Wires
Length Standards (Micrometer Setting Standards)
Levels (Bubble & Digital)
Measuring Tapes
Radius Gages
Railroad Track/Geismar Bars
Rules/Steel Scales
Parallels
PI Tapes
Plain Ring Gages
Plain Plug Gages
Protractors
Sine Bars & Plates
Snap Gages
Spline Gages
Squares
Surface Roughness Standards
Surface Roughness Testers
Thread Locators
V Blocks
Hand Tools:
Calipers
Indicators
LVDT Indicators
Electronic Indicators
Micrometers
OD Micrometers
ID Micrometers
Tri-Micrometers
Depth Micrometers
Thread Micrometers
Bench Micrometers
Calibration of Laboratory Master Gages Including:
Caliper Masters
Micrometer Masters (Mic Trees)
Indicator Calibrators
CMM Masters
Depth Mic Masters
Height Gage Masters
Stage Micrometers
Reference Bars
Universal Length Machines
Vision Systems
Bore Gage Setting Fixtures
MasterScanners
Square Masters
Mechanical Laboratory
Furnished with a sophisticated Torque Calibration System, and a series of weights and torque arms, our torque capability extends up to 1000ft.lbs. Continually expanding our capabilities and expertise to meet our customers’ needs, we are always implementing new equipment and procedures.
Mechanical Calibrations:
Durometers
Durometer Test Blocks
Force Gage
Hardness Testers
Load Cells
Micro Hardness Testers
Pressure Gages
Torque Wrenches
Torque Transducers/Testers
Torque Drivers
Weight Scales
Electronics Laboratory:
Our electronics lab is equipped with the latest Fluke hardware to cover the majority of the meters used by your technicians. Electronics are far too varied to fully list here, please send us your make and model to receive a quote today!
Electrical Calibrations:
Ammeters
Bench Digital Multimeters (DMMs up to 6.5 digits)
Capacitors
Clamp Meters
Data Loggers
Decade Resistors
Impedance Bridgers
Shunts
Hipots
Megohmmeters
Milliohmmeters
Oscilloscopes
Standard Resistors
Rectifiers
Frequency Counters
RTD Sensors
Digital Thermometers
Thermocouple Simulators
Temperature Sensors
Ohmmeters
Ammeters
Voltmeters
Handheld DMMs
Field Service & Repair:
Some instruments are just too big or too sensitive to calibrate anywhere but your facility. Certain gages or measuring instruments are built right into your production line. Other times, there are just too many hand tools to send out. In these cases, we send technicians to your facility to calibrate your equipment on the spot.
On-Site Calibrations:
Bench Micrometers
Hardness Testers
Optical Comparators
Microscopes
Laser Micrometers
Super Micrometers
Universal Length Machines
Lab Masters
Rectifiers
Oven Surveys
Voltmeters
Ammeters
Temperature Sensors
Chart Recorders
Roundness Testers
Surface Roughness Analyzers
Panelmeters
Vision Systems
Scales & Balances
Height Masters
Hand Tool Cleanup Service:
Have you fallen behind on your monthly calibrations? Did you get stuck with a different project? Unexpected time away from the job? When there is a large quantity of hand tools and equipment at your facility, we have technicians that will come to your facility and perform those calibrations on-site.
Calipers
Indicators
LVDT Indicators
Electronic Indicators
Micrometers
OD Micrometers
ID Micrometers
Tri-Micrometers
Depth Micrometers
Thread Micrometers
Bench Micrometers
Sub-Micron Laboratory
Housing some of the most accurate metrology equipment available today, our newest addition to our facility features a laboratory built inside of a laboratory to further decrease our uncertainty and increase the quality of our calibrations.
High Accuracy Dimensional Calibrations:
Gage Blocks
Long Gage Blocks
Plug Gages
Ring Gages
Thread Plug Gages
Thread Ring Gages
Spline Rings
Spline Plugs
CMM Spheres
Optical Flats
Taper Masters
Dimensional Laboratory
With over 60 years combined experience in Metrology, we are equipped to service nearly every type of dimensional gage in the field. Our capabilities are far too expansive to list here, if you have any questions, feel free to reach out for further details.
Dimensional Calibrations:
Chamfer Checkers
Cylinder Squares
Dial Bore Gages
Feeler Gages
Granite Squares
Height Gages
Height Masters
Gage Pins
Gear Wires
Length Standards (Micrometer Setting Standards)
Levels (Bubble & Digital)
Measuring Tapes
Radius Gages
Railroad Track/Geismar Bars
Rules/Steel Scales
Parallels
PI Tapes
Plain Ring Gages
Plain Plug Gages
Protractors
Sine Bars & Plates
Snap Gages
Spline Gages
Squares
Surface Roughness Standards
Surface Roughness Testers
Thread Locators
V Blocks
Hand Tools:
Calipers
Indicators
LVDT Indicators
Electronic Indicators
Micrometers
OD Micrometers
ID Micrometers
Tri-Micrometers
Depth Micrometers
Thread Micrometers
Bench Micrometers
Calibration of Laboratory Master Gages Including:
Caliper Masters
Micrometer Masters (Mic Trees)
Indicator Calibrators
CMM Masters
Depth Mic Masters
Height Gage Masters
Stage Micrometers
Reference Bars
Universal Length Machines
Vision Systems
Bore Gage Setting Fixtures
MasterScanners
Square Masters
Mechanical Laboratory
Furnished with a sophisticated Torque Calibration System, and a series of weights and torque arms, our torque capability extends up to 1000ft.lbs. Continually expanding our capabilities and expertise to meet our customers’ needs, we are always implementing new equipment and procedures.
Mechanical Calibrations:
Durometers
Durometer Test Blocks
Force Gage
Hardness Testers
Load Cells
Micro Hardness Testers
Pressure Gages
Torque Wrenches
Torque Transducers/Testers
Torque Drivers
Weight Scales
Electronics Laboratory:
Our electronics lab is equipped with the latest Fluke hardware to cover the majority of the meters used by your technicians. Electronics are far too varied to fully list here, please send us your make and model to receive a quote today!
Electrical Calibrations:
Ammeters
Bench Digital Multimeters (DMMs up to 6.5 digits)
Capacitors
Clamp Meters
Data Loggers
Decade Resistors
Impedance Bridgers
Shunts
Hipots
Megohmmeters
Milliohmmeters
Oscilloscopes
Standard Resistors
Rectifiers
Frequency Counters
RTD Sensors
Digital Thermometers
Thermocouple Simulators
Temperature Sensors
Ohmmeters
Ammeters
Voltmeters
Handheld DMMs
Field Service & Repair:
Some instruments are just too big or too sensitive to calibrate anywhere but your facility. Certain gages or measuring instruments are built right into your production line. Other times, there are just too many hand tools to send out. In these cases, we send technicians to your facility to calibrate your equipment on the spot.
On-Site Calibrations:
Bench Micrometers
Hardness Testers
Optical Comparators
Microscopes
Laser Micrometers
Super Micrometers
Universal Length Machines
Lab Masters
Rectifiers
Oven Surveys
Voltmeters
Ammeters
Temperature Sensors
Chart Recorders
Roundness Testers
Surface Roughness Analyzers
Panelmeters
Vision Systems
Scales & Balances
Height Masters
Hand Tool Cleanup Service:
Have you fallen behind on your monthly calibrations? Did you get stuck with a different project? Unexpected time away from the job? When there is a large quantity of hand tools and equipment at your facility, we have technicians that will come to your facility and perform those calibrations on-site.
Calipers
Indicators
LVDT Indicators
Electronic Indicators
Micrometers
OD Micrometers
ID Micrometers
Tri-Micrometers
Depth Micrometers
Thread Micrometers
Bench Micrometers
Careers
© Micro Laboratories, Inc. 2020.
All rights reserved.
7158 Industrial Park Blvd
Mentor, OH 44060
Business Hours:
Monday through Friday
8:00 AM – 4:30 PM EDT
ISO 17025
